We realized industrial fabric air duct application in Friterm Dilovası Factory
As Esair Fabric, we visited the Friterm Dilovası Factory, where we have installed the industrial fabric air duct application. We had a pleasant conversation with General Manager Naci Şahin.
Founded in 1979, Friterm has taken firm steps forward in the air conditioning and industrial refrigeration sector. While Friterm has grown over the years by concentrating on areas such as heat exchangers, air-cooled condensers and dry coolers, its production facilities have expanded in parallel with this growth. While their 24.000 m2 Dilovası Facility was being built, they preferred our Esair Fabric brand textile air duct product for ventilation and air distribution in the production area. When compared to the galvanized ducts used in the past and Esair Fabric Textile Air Ducts in many aspects such as the entry of fresh air into the facility and the effective distribution of heated air to the ground, they concluded that Esair Fabric Textile Air Ducts are ahead in terms of performance and are appropriate in terms of production cost. The most critical point in the operations was the fact that hot air would be blown from a height of 10 meters. Therefore, the air had to reach points close to the ground. We have implemented this application with additional processes such as Esair Fabric’s new fabric nozzle design and coating the fabric duct with the lowest air permeability amount.
As a result, we saw that the desired air flow reached the desired point. Heated air is distributed effectively in an area of 24.000 m2 with 3 parallel lines. Fabric air ducts, which are more economical than galvanized ducts, can also be produced in different colors and add a stylish atmosphere to your business.